How to Perform LG Washer Drain Pump Repair

If you are in need of a LG Washer Drain Pump repair then it is important that you do not hesitate to do it yourself. You don’t want to get into a mess trying to clean up your drains with a used pump and possibly end up ruining your drains. There are several steps you can take to ensure the problem goes away quickly without the need for expensive repairs or replacement of the drain itself.

You may be able to handle the LG Washer Drain Pump repair yourself, however, if you are inexperienced it may be best to let someone know what needs to be done so you don’t end up doing more damage than good. Take your time when putting together a plan for cleaning out your drains. Do not attempt to try to clean your drains on your own unless you are very knowledgeable about how to do so. This will only lead to further complications.

If the problem with your LG Washer Drain Pump repair is simply one big clog in the pipe itself then it may be better to replace the entire drain instead of just trying to fix one part of it. Be sure to disconnect the main power supply from your house before attempting to pull apart the clog. If the water starts to flood into your home, this could cause an accident.

Before beginning to clean out your drains, make sure you have all of your tools ready. Your tools such as wire stripper, wire strippers, drain snake, bucket and other items that may be needed. The first thing you will want to do is make sure the pipes that run to the drain are clear of debris and clogs.

You will want to begin by pulling off the rubber gasket at the top of the drain pump. Make sure you pull off the old gasket before replacing it. It may also be necessary to remove the nuts and bolts that hold the cover onto the drain pipe. Remove these nuts and bolts so that you can get to the pipe and clean out the clog and pipe.

Once you have removed the gasket, you will then need to disconnect the main supply line from the house so that you can drain the clog out. After draining the clog out, you should replace the gasket and tighten up the nuts and bolts that hold the cover to the drain pipe.